BLUECOR™ Insulation is a thin (1/4") fanfolded extruded polystyrene foam board with plastic film on both sides. Fanfolded 50' lengths are easy to install and work with on the job site. The high-grade polystyrene formulation coupled with the heat bonding of the capsheets (no glue used) permits 90º "folding" around corners without breakage or the need for reinforcement tape.
Building Code Compliance
Meets IBC/IRC requirements for foam plastic insulation. See ESR-2142, BOCA-ES RR 21-02, ICBO-ES ER-2257. UL Classified, see Classification Certificate U589. Calif. Std. Reg. # CA T064. Florida Building Code FL 3835.
We're here to help. If you're not finding the information you need, please let us know.
Related Information
Fanfolded and economical, BLUECORâ„¢ Insulation is easy to install and work with in residing and foundation applications.
Existing Wall (Residing) – Installing BLUECOR™
Exterior Basement Wall – Installing STYROFOAM™ PERIMATE™, Square Edge, SCOREBOARD™, Tongue & Groove or BLUECOR™
| Nominal Board Thickness, in | R-Value(1) | Board Size, ft | Edge Treatment | Min Compressive Strength(2), psi |
| .25 | 1.0 | 4 x 50 | Square Edge | 15 |
|
(1) R means resistance to heat flow. The higher the R-value, the greater the insulating power. R-values are expressed in ft2 • h•°F/Btu. R-value determined by ASTM C518. (2) Vertical compressive strength is measured at 10% deformation or at yield, whichever occurs first. |
||||
07 20 00 – Board Insulation
